Driveline Ford Mustang

Send us you existing driveline core, let us rebuild  and balance your Mustang core and you save money at least 20%!

Drivelines, Rear Ends, Overdrive Units, Manual Transmissions and Transfer Cases, Full Service Shop . Visit our full service shop located in the Reno/Sparks Nevada area, stop bye and say hello.

Vibrating Drivelines will cause extensive damage to your transfer case, transmission or differential, knocking out seals, causing leaking fluid. For your Mustang we offer a complete selection of replacement Drivelines as well as Service in our Reno/Sparks Facility. We are experts in Drivelines, we are specialists in the following Driveline area’s:

  • Design
  • Repairs
  • Modifications
  • Complete Assemblies
  • Shortening / Lengthening designs, fabricate and restores shafts for consumers around the world. We have created unique tooling that we use to assemble and balance your Driveline. These abilities and skilled personnel lead to exceptional unmatched shafts that supply’s better than OE specifications. Under acceleration and highway speeds the Mustang vibrates and shakes. You can feel it in the floorboards, seat of your pants, pedals, steering wheel of the Mustang. See list of drivelines we can provide.

Select vehicle from table below to see other Drivelines we offer!


Dodge Car
Dodge Truck
G Series Chevy 
 Honda Ridgeline
Honda Ridgeline
J10 Truck
J10 Jeep Truck
jeep logo 3
Jeep Cherokee
 Jeep 4
Jeep Commander
Jeep Grand Wagoneer
Jeerp logo 2
Jeep Liberty
 KIA logo
Lexus logo
  • Want to replace an aluminum Driveline?
  • Want to replace a carbon fiber drive shaft?
  • Or just need a replacement?

30 Years Experience, we can Help!

Save money send us you core and we will re-builld it and high speed balance your shaft. Save 20% or more!

Call 800-216-1632 We can help you!

Review our You tube video, see how Drivelines are manufactured

Vibrations Problems Mustang

This challenge is usually caused by used or worn u-joints or dings in long tubing. We can offer support and tips for u joint maintenance for your Mustang Mustang.

Running raised Mustangs with larger tires, are you changing the transfer case model, or transmission. If you have a two piece Driveline it's important to balance the complete assembly at the same time, just contact us (800-216-1632) we will help you get rid of vibration problems. See our free detailed information below:

Mustang Driveline Problems:

Want to review our detailed high quality Driveline manufacturing process we have provided a detailed video.

Driveline Mustang Failure Symptoms 

New or strange noises from under the vehicle are a symptom of a problem with the Driveline. These noises can emulate from the following:

Transmission or T-Case rear bushing or Driveline center support bearing will facilitate Driveline malfunction. Driveline U-joints excessive wear or failing will interfere with the Driveline’s ability to rotate properly. This will cause; rattling, clunking, scraping, or even squeaking sounds.

U-joints might be operating dry of lubrication, may also produce a squeaking noise at lower speeds. Clicking or knocking sounds specifically can indicate a faulty CV joint. Any noises such as these are an indicator that your vehicle is ready for maintenance. Problems with turning the vehicle is another likely sign of a bad Driveline. A broken Driveline can prevent wheels from turning properly, giving you trouble when trying to make turns. This issue limits your overall control of the Mustang. These issues can prevent you from driving the Mustang correctly.

With time, Driveline sliding motion can develop grooves in the splines, and when you accelerate fast, or stop fast, the Driveline can move more than normal, and it slips over this groove(s). The noise is amplified by the Driveline, and you can hear it.

Shuddering Mustang Driveline

Experiencing a significant shudder when accelerating from low speed or a stopped position, it can be another sign of failing Driveline component. A U-joint or bad center bearing within the Driveline may cause the faltering acceleration. You may also hear sounds while the Mustang is shuddering from the worn-out U-joint. Driveline failure at freeway speeds is traumatic, don’t let it happen to you or your wife.

Mustang Modifications

New  shafts as well as re-manufactured Drivelines are available, let us repair your existing Driveline assembly and you save money.

When you are modifying your Mustang the Driveline often needs modifying to; Lifting or lowering the suspension, swapping transmissions or axles, customs, all of these things usually require drive shaft modification to be done correctly.

We are able to fabricate 4 different Drivelines configuration for the Mustang. Along with a full assortment of new Spicer Dana and NEAPCO yokes, u-joint parts, and flanges, current shafts reduced or lengthened.

Also, heavy duty industrial shafts are one of our primary products such as over the highway 18 wheeler, farming, construction building, and mining shafts. We also have a large stock of power take off shaft (PTO). Double and individual CV joint shafts created for Mustangs with perspective problems are available, along with shafts designed to your particular design and design specs.

The essential function of your Driveline is always to transmit energy from a point (rear of transmission or transfer case to another point with constant action. In construction, Mustangs and Mustangs, the drivetrain was created to send torque through angles from your transmission for the axle (or auxiliary transmission). The Driveline must go through constantly changing general viewpoints in the middle the transmission and axle. It must also be able to transforming size while transmitting torque (by way of the sliip yoke). rides suspended by springs inside an unusual, hovering motion. This indicates the Driveline must have the capacity to broaden, change and contact working perspectives, when experiencing protrusions or depressions. This is often accomplished through common joint parts, which permit the Driveline to be used at divergent angles, in addition to slip yokes, which allow contraction or growth to happen.

If your Driveline is not well-balanced with all the genuine yoke and U-joint components, you’re in repair may cause more vibrations. Our facility features the newest in Driveline production, and precision balancing equipment and tooling.

High Speed Balance is the key to vibrations totally free efficiency!

A Driveline is not planning to operate clear and vibrations-cost-free unless it is right plus in balance. Our shafts are, right after set up and before welding, pre-straighten inside a unique hydraulic tool, it is actually straightened to improve than factory specifications. We then dynamically high speed balance harmony of the whole shaft assembly.

Be careful with this inspection other Driveline clunks they can be caused by worn spider gears in differential or worn splines in your r yoke.

We also specialize in high end service, if you are delivering to us your outdated Driveline to be rebuilt your Driveline will leave our store within 36 hours after being received. Don't see what you need just contact us toll free (800-216-1632), free technical support.

Drive line failure breakdown could leave you helpless in the middle of the freeway. Good practice is to periodically check and maintain the U-joints of your vehicle. If you fail to do that, your bad U-joints may cause damage to other vehicle parts, (transfer case, rear end & transmission) or even lead to a fatal accident.

Drivetrain’s one-part Drivelines are transported assembled and ready to install completely from the box. Our shafts are factory balanced for guaranteed performance, along with a lengthy service life. Simply eliminate your outdated drive shaft and install the newest one in its place.

Driveline Mustang  Parts

We can also provide both new and good take out Driveline parts individually, our GTO program is designed to save you money! Large stock of Dana Spicer and NEAPCO inventory includes:

  • Yoke Shafts
  • Weld Yokes
  • End Yokes
  • Stub shaft ends
  • Slip Yokes
  • U-joints
  • Tubing

To ensure exact replacement driveshaft for your application we will need to know the following information:

  • Make, model and year of vehicle
  • Manual or Automatic transmission, with or without external overdrive
    3, 4,  5 or 6 speed transmission
  • Model number of transfer case (if 4WD)
  • Engine size and type (diesel or gasoline - 4, 6, or 8 cylinder)
  • Series of drive shaft (if you know it)
  • Wheel base of vehicle
  • Measure from center of ujoint front to back center of ujoint
  • Location of Driveshaft (front or rear)

Don't see what you need just give our Driveshaft Technical expert a call toll free 800-216-1632, free technical support.

Part Number Min Year Max Year Make Model Description
DTS10002094 2011 2014 Ford Mustang GT (V8) Ford Mustang 3.5" 1430mm
DTS10001767 2005 2010 Ford Mustang GT (V8) Ford Mustang 3.5" 1430mm 4.0" 1336mm
DTS10001796 2007 2014 Ford Mustang GT500 (V8) Ford Mustang 3.5" 1430mm 4.0" 1312mm
DTS10001797 2011 2014 Ford Mustang GT (V8) Ford Mustang 4.0" 1430mm