AX5 Manual Transmission Rebuild Kits
An extensive list of transmission tag identification information is provide at our tag conversion table, check it out cross reference your information and get the correct parts the first time.
Different overhaul kits are available depending on the extent of the overhaul that you planning, the contents of the kits are described as follows:
-
DTSBKXXX Kits (RWD): Main case bearings, gaskets, seals. You may also want to add new bearing retainer, nuts, dogs & wires, extension housing bushing, small parts kit, shifter bushings. Syncro rings are not included in these kits.
-
DTSBKXXXWS Kits (RWD): Main case bearings, gaskets, seals. You may also want to add bearing retainer, nuts, dogs & wires, extension housing bushing, small parts kit, shifter bushings. Syncro rings are included in these kits.
-
An AX5 transmission illustration is provided to assist you with ordering the correct parts.
Information and parts are provide for the following Transmission: Asian Warner AX5 5 Speed (RWD)
AX5 (4 Cylinder) | 80mm Outside Diameter Input Bearing |
1984-96 |
AX5 (6 Cylinder) | 80mm Outside Diameter Input Bearing |
1986 |
Below you will find parts for the AX5 5 speed transmissions used in AX5 Jeep. In addition to these overhaul kits we can provide miscellaneous hardparts, don't see what you need just give us a call.
AX5 Manual Transmission Rebuild Kits Products
Vehicle | Trans. Model | Year | Description | Overhaul Kit | Overhaul Kit with Syncro Rings | ||||
5spd, RWD or 4WD Toyota design - | |||||||||
JEEP | Cherokee, Grand Cherokee, Comanche & Wagoneer | 4 cyl | 2.1L | AX5 | 1984-87 | 20mm wide input bearing | DTSBK160A | DTSBK160AWS | |
JEEP | Cherokee, Grand Cherokee, Comanche & Wagoneer | 4 cyl | 2.5L | AX5 | 1984-87 | 20mm wide input bearing - nut type countershaft | DTSBK160A | DTSBK160AWS | |
JEEP | CJ2A, CJ3A, CJ5, CJ6, CJ7, CJ8, Jeepster, Scrambler & Wrangler | 4 cyl | 2.1 L | AX5 | 1984-87 | 20mm wide input bearing | DTSBK160A | DTSBK160AWS | |
JEEP | CJ2A, CJ3A, CJ5, CJ6, CJ7, CJ8, Jeepster, Scrambler & Wrangler | 4 cyl | 2.5L | AX5 | 1984-87 | 20mm wide input bearing - nut type countershaft | DTSBK160A | DTSBK160AWS | |
JEEP | Cherokee, Grand Cherokee, Comanche & Wagoneer | 4 cyl | 2.1L | AX5 | 1984-87 | 23mm wide input bearing | DTSBK161A | DTSBK161AWS | |
JEEP | Cherokee, Grand Cherokee, Comanche & Wagoneer | 4 cyl | 2.5L | AX5 | 1984-87 | 23mm wide input bearing - nut type countershaft | DTSBK161A | DTSBK161AWS | |
JEEP | CJ2A, CJ3A, CJ5, CJ6, CJ7, CJ8, Jeepster, Scrambler & Wrangler | 4 cyl | 2.1L | AX5 | 1984-87 | 23mm wide input bearing | DTSBK161A | DTSBK161AWS | |
JEEP | CJ2A, CJ3A, CJ5, CJ6, CJ7, CJ8, Jeepster, Scrambler & Wrangler | 4 cyl | 2.5L | AX5 | 1984-87 | 23mm wide input bearing - nut type countershaft | DTSBK161A | DTSBK161AWS | |
JEEP | Cherokee, Grand Cherokee, Comanche & Wagoneer | 4 cyl | 2.5L | AX5 | 1987-01 | 23mm wide input bearing - snap ring type countershaft | DTSBK161LA | DTSBK161LAWS | |
JEEP | CJ2A, CJ3A, CJ5, CJ6, CJ7, CJ8, Jeepster, Scrambler & Wrangler | 4 cyl | 2.5L | AX5 | 1987-02 | 23mm wide input bearing - snap ring type countershaft | DTSBK161LA | DTSBK161LAWS |
DESCRIPTION |
TYPE |
YEARS |
|
SYNCHRO RING KITS | |||
SRK157 | Syncro Ring Kit | AX5 |
1984-97 |
MISCELLANEOUS KITS | |||
K100502-8 | Gasket & Seal Kit | AX5 |
1984-96 |
DK500 | Syncro Dog & Spring Kit | AX5 |
1984-96 |
TRS372001 | Small Parts Kit | ||
BEARINGS | |||
301570 | Input | AX5, 23mm Wide |
1984-96 |
301770 | Countershaft, Front | AX5 |
1984-96 |
MTCNBAX5 | Needle Bearing Kit | ||
METAL CLAD SEALS | |||
301080 | Front |
1989-97 |
|
301038 | Rear | 2WD |
1989-97 |
301089 | Rear | 4WD |
1989-97 |
MISCELLANEOUS HARD PARTS | |||
TRS37670 | Input Shaft Gear | AX5 (Gas) with 20mm Wide Front Bearing |
1984 |
TRS37670A | Input Shaft Gear | AX5 (Gas) with 23mm Wide Front Bearing |
1985-E87 |
TRS372672 | Main Shaft 4WD | 1984-E87 | |
TRS372672A | Main Shaft 4WD | 1987-Up | |
TRS83500557 | Cluster Gear 45-31-20-13-14 | AX5 (Gas) with nut | |
TRS83506023 | Cluster Gear 45-31-20-13-14 | AX5 (Gas) with Snap Ring | |
TRS372735 | Front Bearing Retainer | AX5 with snout |
1984-E87 |
TRS372735A | Front Bearing Retainer | AX5 with out snout |
1987-Up |
TRS372736 | Rear Bearing Retainer | 1984-87 | |
TRS372736A | Rear Bearing Retainer | 1987-Up | |
ALT83500629 | Switch, Backup Light fits AX5 | 2 Prong with wires | |
TRS57066A | Extension Housing Bushing 1.500" ID | 2WD AX5 |
1984-97 |
Note: Check Tag to Component Identification Chart to verify proper gear and/or kit application. |
For a replacement high quality remanufacture transmissions see manual transmissions These units have a 12 month, unlimited mile warranty. In addition some information is provide relative to possible transmission conversions.