Having problems with your Peugeot built Jeep BA10 manual transmission, need parts? These quality manual transmission parts, rebuild kits and overhaul kits for the Jeep BA10 manual transmissions 
are designed to be top of the line overhaul kits. We have include information on how to identify individual transmissions, application information, model year, and detailed kit and part availability by transmission type. Peugeot transmission are covered in this section BA10's, rear wheel drive (RWD). Typically used in AMC and Jeeps requiring 5 speed applications.
Different overhaul kits are available depending on the extent of the overhaul that you plan, the contents of the kits are described as follows:
- K Kit (RWD): Main case bearings, gaskets and seals.
An illustration of this transmission is provided to assist you with ordering the correct parts. In addition to the below information you can find Jeep manual transmission ratio and size data on our site at: Jeep ratio data, Jeep identification tag cross reference information is also available.
Information and parts are provided for the following Transmission: Jeep BA/10 5 Speed (RWD)
IDENTIFICATION Aluminum case is vertically split lengthwise. The bearings are tapered except for the rear main shaft and rear countershaft bearings. The syncros are aluminum ring/pin assemblies, the outer plates of which are part of the forward speed gears. There are no ball bearings or brass syncro rings in this unit. This unit is only used in the 1987-1989 6 cylinder Jeep there are both 5 or 6 bolt mounting flanges for the transfer case on 4wd models.
The case codes are:
53002035, 53002838, 53003234, 53005248, 53005251,
53005252, 53005451, 53005453, 53005454.
Jeep BA10 Overhaul Kit Products
|
Part Number |
Description |
Type |
Years |
Your Cost |
| Rebuild Kits |
|
|||
| ALTBK219 | Rebuild Kit Bearing, gaskets and seals |
|
1987-89 |
$590.00 |
| ALTBK219WS | Overhaul Kit Bearing, gaskets, seals and brass syncro rings |
1987-89 |
$735.00 |
|
| Syncro Ring Kits |
|
|||
| 301152A | 1/2 Syncro Assembly |
|
1987-89 |
$211.82 |
| 301152B | 3/4 Syncro Assembly |
|
1987-89 |
$211.82 |
| 301152C | 5th Syncro Assembly |
|
1987-89 |
$211.82 |
| Miscellaneous Parts |
|
|||
| 301452 | Reverse Gear Set Used to address Reverse Gear pop out condition. Input and cluster sold as set only: |
|
1987-89 |
$264.60 |
| 301453 | Input Shaft Gear | Sold only with 301454 |
1987-89 |
$263.53 |
| 301454 | Cluster Gear Cluster 301454 is to be used only in conjunction with a 32 Tooth Main shaft 1st Gear. | Sold only with 301453 |
1987-89 |
$287.27 |
| 301446 | 1st Gear | 32 Teeth |
1987-89 |
$216.86 |
| Use with aftermarket gears only | ||||