These quality manual transmission parts, rebuild kits and overhaul kits are designed to be top of the line overhaul kits. We have include information on how to identify individual transmissions, application information, model year, detailed kit and part availability by transmission type. Nissan transmission are covered in this section RS5F50A/V's, front wheel drive (FWD). Typically used in Nissan cars 5 and 6 speed applications including Altima, Maxima, Pulsar, Stanza, Stanza Van, Axxess and Infinity I30.


Different overhaul kits are available depending on the extent of the overhaul that you plan, the contents of the kits are described as follows:

  • DTS-BKXXX Kits (FWD): Main case bearings, gaskets, seals, kits however miscellaneous parts will vary by transmission. Nuts, dogs & wires, thrust bearings, extension housing bushing, small parts kit, shifter bushings are ordered separately.Syncro rings are not supplied in these kits see kit below.
  • DTS-BKXXXWS Kits (FWD): Main case bearings, gaskets, seals, kits and Syncro Rings, miscellaneous parts will vary by transmission. Nuts, dogs & wires, thrust bearings, extension housing bushing, small parts kit are ordered separately.

    Information and parts are provide for the following Transmission: Nissan RS5F50A / Y 5 Speed (FWD), an illustrated parts drawing of the RS5F50 is provided.

Nissan RS5F50A/V Overhaul Kit Products

IDENTIFICATION - 2-piece case with solid back half and no rear cover. Ball bearings on front and rear of input shaft. Some 1990-On transaxles may or may not have a Viscous Differential Carrier (LSD). We offer overhaul kits for the following Nissan model transmissions: RS5F50, RS5F50A, RS6F50A, RS5F50C, RS5F50V and RS5F50Y. In addition to overhaul kits we also provide individual parts

Please Click on part number to buy it online 

    Model Cyl. Eng. Year   Description Overhaul Kit Your Cost   Overhaul Kit w/Syncro Rings Your Cost
  RS5F50 5spd, FWD                  
    ALTIMA 4 cyl 2.4L 1993-01   Aluminum case - 2nd syncro ring is multi-piece design - standard differential (non-posi) DTS-BK182C $225.50   DTS-BK182CWS $425.90
    ALTIMA 4 cyl 2.4L 1993-01   Aluminum case - 2nd syncro ring is multi-piece design - non-slip differential (posi) DTS-BK182F $212.82   DTS-BK182FWS $486.88
    ALTIMA 4 cyl 2.5L 2002-on   Aluminum case DTS-BK439 Call   DTS-BK439WS Call
    ALTIMA 6 cyl 3.5L 2002-on   Aluminum case DTS-BK440 Call   DTS-BK440WS Call
    SENTRA 4cyl 2.5L 2002-on   Aluminum case, standard differential (non-posi) DTS-BK439 Call   DTS-BK439WS Call
    SENTRA 4cyl 2.5L 2002-on   Aluminum case, non-slip differential (posi) DTS-BK439A Call   DTS-BK439AWS Call
  RS5F50A 5spd, FWD                  
    I3O 6cyl 3.0L 1996-99   Standard differential (non-posi) DTS-BK182D $246.88   DTS-BK182DWS $419.69
    I3O 6cyl 3.0L 1996-99   Non-slip differential (posi) DTS-BK182E $275.85   DTS-BK182EWS $481.11
    MAXIMA 6 cyl 3.0L 1985-86   Aluminum case - 68mm O.D. tapered differential bearings - 74.05mm O.D. 1st syncro ring (measurement where ring indexes hub) If you have a 1985 to 1990 MAXIMA that has two different sized differential bearings, please Call DTS-BK182 $175.68   DTS-BK182WS $271.20
    MAXIMA 6 cyl 3.0L 1986-87   Aluminum case - 68mm O.D. tapered differential bearings - 73.40mm O.D. 1st syncro ring (measurement where ring indexes hub) IF YOU HAVE A 1985 TO 1990 MAXIMA THAT HAS TWO DIFFERENT SIZED DIFFERENTIAL BEARINGS, PLEASE CALL DTS-BK182 $175.68   DTS-BK182WS1 $305.97
    MAXIMA 6 cyl 3.0L 1987-90   Aluminum case - 68mm O.D. tapered differential bearings - reverse syncro ring IF YOU HAVE A 1985 TO 1990 MAXIMA THAT HAS TWO DIFFERENT SIZED DIFFERENTIAL BEARINGS, PLEASE CALL DTS-BK182 $175.68   DTS-BK182AWS $311.80
    MAXIMA 6 cyl 3.0L 1991   Aluminum case - 70mm O.D. x 40mm I.D. differential bearings - 2nd syncro ring is multi-piece design, syncro reverse ring DTS-BK182C $225.50   DTS-BK182CWS $425.90
    MAXIMA 6 cyl 3.0L 1991-96   Standard differential (non-posi), aluminum case - 70mm O.D. x 42mm I.D. differential bearings - 2nd syncro ring is multi-piece design, syncro reverse ring DTS-BK182D $246.88   DTS-BK182DWS $419.69
    MAXIMA 6 cyl 3.0L 1997-01   Standard differential (non-posi), aluminum case - 70mm O.D. x 42mm I.D. differential bearings - 1st and 2nd syncro rings are multi-piece design DTS-BK182D $246.88   DTS-BK182HWS $567.47
    MAXIMA 6 cyl 3.0L 1991-96   Non-slip differential (posi), aluminum case - 70mm O.D. x 42mm I.D. front case differential bearing - 100mm O.D. x 65mm I.D. rear case differential bearing - 2nd syncro ring is multi-piece design, syncro reverse ring DTS-BK182E $275.85   DTS-BK182EWS $481.11
    MAXIMA 6 cyl 3.0L 1997-01   Non-slip differential (posi), aluminum case - 100mm O.D. rear case differential bearing - 1st and 2nd syncro rings are multi-piece design DTS-BK182E $275.85   DTS-BK182IWS $629.79
  RS6F50A 6spd, FWD                  
    MAXIMA 6 cyl 3.0L 2002-on   Standard differential (non-posi), aluminum case DTS-BK441 $456.86   DTS-BK441WS Call
    MAXIMA 6 cyl 3.0L 2002-on   Non-slip differential (posi), aluminum case DTS-BK441A Call   DTS-BK441AWS $848.28
  RS5F50C 5spd, FWD                  
    PULSAR 4cyl 1.8L 1988-90   Aluminum case DTS-BK182 $175.68   DTS-BK182WS $271.20
    STANZA (Not STANZA VAN) 4cyl 2.0L 1986-89   Aluminum case - 68mm O.D. tapered differential bearings DTS-BK182 $175.68   DTS-BK182WS $271.20
    STANZA (Not STANZA VAN) 4cyl 2.4L 1990   Aluminum case - 68mm O.D. tapered differential bearings DTS-BK182 $175.68   DTS-BK182WS $271.20
    STANZA (Not STANZA VAN) 4cyl 2.4L 1991-92   Aluminum case - 2nd syncro ring is multi-piece design - standard differential (non-posi) DTS-BK182C $225.50   DTS-BK182CWS $425.90
    STANZA (Not STANZA VAN) 4cyl 2.4L 1991-92   Aluminum case - 2nd syncro ring is multi-piece design - non-slip differential (posi) DTS-BK182F $212.82   DTS-BK182FWS $454.84
    STANZA VAN 4cyl 2.0L 1986-88   Aluminum case DTS-BK239 $323.13   DTS-BK239WS $439.29
    STANZA VAN  4cyl 2.0L 1986-88   Aluminum case DTS-BK182 $175.68   DTS-BK182WS $271.20
  RS5F50V 5spd, FWD                  
    AXXESS 4 cyl 2.4L 1989-90   Aluminum case. If you have a unit that uses one 68mm O.D and one 70mm O.D. Differential bearings please call DTS-BK182 $175.68   DTS-BK182AWS $311.80
  RS5F50Y 5spd, FWD                
    AXXESS 4 cyl 2.4L 1989-90   Aluminum case DTS-BK182G $256.86   DTS-BK182GWS $424.64

 

Part Number

Per Car

Description

Type

Years

Your Cost

BEARINGS

 

301548 1 Input Bearing, Front  

1985-96

$23.02

301561 1 Input Bearing, Rear  

1985-96

$40.76

301710 1 Pinion Bearing, Front  

1985-96

$22.44

301722 1 Pinion Bearing, Rear  

1985-96

$20.98

301718 2 Differential 40mm X 68mm

1985-90

$24.22

301759 2 Differential (1991 Maxima) 40mm X 70mm

1991-95

$91.33

301758 2 Differential (Maxima Only) 42mm X 70mm

1992-96

$58.27

METAL CLAD SEALS

 

301070 1 Front Input 43mm O.D.

1985-96

$7.50

75551 1 Axle, Right 33mm X 59mm

1985-96

$9.48

87552C 1 Axle, Left 39mm X 59mm

1985-96

$13.96

75551D* 1 Axle, Left with LSD 46mm X 90mm

1990-96

$16.96

    * Left Axle Seal for RS5F50V is not included in kit. Order as Needed.