Dana 30 Front Axle Ring & Pinion Sets

dana30_large.jpg

 
  
 
Having problems with Dana 30 front end?  We offer a complete line of axle parts for the Dana 30 differential. You can purchase high quality ring and pinion sets in various ratios, high quality rear end bearing overhaul kits including pinion bearings, pinion seal, crush sleeve, pinion nut, shims, ring gear bolts, marking compound and gasket.  
Chrysler utilized the Dana 30 differential in their Jeep line starting in 1966 in the J10, Wagoneer, CJ5 and Cherokee. International used in the Scout from 1967 to 1980, it is also found in some Ford applications Aerostar 1986 to 1990 and in early Bronco's 1967 to 1971. Our inventory includes ring gear and pinion sets, including aftermarket and OE gear sets. You can also purchase axles, carriers, cases, spider and side gear . We feature a wide selection of positractions for you to pick from including Eaton Detroit Lockers, Trac Loc positraction units we also offer Lockrights by Powertrax, Auburn,  and ARB air lockers.  We are a Dana Spice volume distributor and offer a complete line or ring gear and pinions and differential parts. To talk to a rear end expert call 800-216-1632 and let us help you fix the problem and save you some money!

Along with our quality parts you have access to applications information for available ring and pinion ratios, information to assist you in identification of the differential that you have. Free information on ring and pinion installation is provided alone with specifications and carrier/case breaks when you are considering gear ratio changes. Free Technical advise, just call.


When ordering Dana/Spicer Differential Parts provide bill of material number. This number isbillofmaterial_large.jpgstamped on the right hand side axle tube. It's a number like 603XX-X, 604XX-X or 605XX-X.

With this number we can tell you exactly what components the factory used in the assembly of your differential.  You can   the following link below to research exactly what parts you need, following step 1 and then step 2 and then enter your bill of material number:bill_of_material_instruction.jpg  You will see a detailed list of parts and part numbers for your application.

You get the right parts the first time!  Once you know the bill of material number give us a call or down load an application catalog 1999-2011 Dana 30 Front TJ Wrangler, XJ, X1 Cherokee, JK Wrangler adn WJ Grand Cherokee, Super 30 JK, WJ, KA & KJ Liberty inlcuding Exploded Views, Parts Listings and Bill of material tables to help you identify the parts you need.

Ring and Pinions Sets
Cases, Bearing kit and Misc Parts
Positraction Units

Purchase the parts at drivetrain.com and receive free installation technical support by telephone! Yes real technicians with many years experience, not just a salesperson.
     
     
 
Model

Year

   Model

Year
Ford Aerostar

86-90

   Jeep J10 F

66-88
Bronco & U100

67-71

   Jeep Wagoneer F

67-88
IHC Scout F

67-80

   Jeep Cherokee XJ

86-95
Jeep C101 F&R

67-74

   Jeep Wagoneer YJ

87-96
Jeep CJ5 & CJ7 F

67-68

      

 

 Dana 30 Front Parts Illustration   Down load a Dana_30_service_manual  if you need to do maintenance or repairs.

 

dana30silo_large.jpg

 

9-1/8"

10 HOLES
OVAL Gasket Pattern
Specifications:
  • Ring Gear DIAMETER 7.20"
  • 10 3/8" X 20 RH THREADED BOLTS
  • PINION DIAMETER 1.376" 26 SPLINE

    CASE: 3.55 NUMERICALLY LOWER & 3.73 &  HIGHER

    8620 Material Heat-Treated

    Assembly Specifications:

  • Cover Bolt Ft. Lbs. 30-40
  • Pinion Brg. Preload In. Lbs 20-40
  • Pinion Nut Ft. Lbs. 200-220
  • Ring Gear Backlash .005-.009
  • Ring Gear Bolt to case Ft. Lbs. 45-60
  • Side Brg. Caps Ft. Lbs. 35-50

    Instructions for setting up ring and pinion backlash.

Dana/Spicer Kits includes ring & pinion, gasket, pinion bearings, bolts, seal and shims, pinion nut & washer. We also offer Carrier Bearings.

When ordering Dana/Spicer Differential Parts provide bill of material number. This number is billofmaterial_large.jpgstamped on the right hand side axle tube. It's a number like 603XX-X, 604XX-X or 605XX-X.

With this number we can tell you exactly what components the factory used in the assembly of your differential

You get the right parts the first time!
 

Dana 30 Differential Parts

 
Dana 30 Front Axle Ring & Pinion Sets Products 
Part Number
 Item
 Description
 Your Cost
  
Ring and Pinions      
706930-2X RING & PINION KIT 3.07 RATIO REVERSE, 26 SPLINE PINION REVERSE FRONT $266.51
dana 30 ring gear and pinion

 
707244-1X RING & PINION KIT 3.07 RATIO, 26 SPLINE PINION FRONT $230.79
707344-2X RING & PINION KIT 3.07 RATIO, 26 SPLINE PINION, SHORT PINION SHAFT TJ FRONT W/COLLAPSIBLE SPACER SHORT PINION $206.40
708132-1 RING & PINION KIT 3.07 2001 XJ $245.28
706503-2X RING & PINION KIT 3.54 RATIO, 26 SPLINE PINION STRAIGHT CUT FRONT & REAR $221.01
707344-10X RING & PINION KIT 3.54 RATIO, 26 SPLINE PINION, SHORT PINION SHAFT TJ FRONT W/COLLAPSIBLE SPACER SHORT PINION $247.24
2005018-5 RING & PINION 3.55 2007 KA FRONT $239.70
2005046-1 RING & PINION Standard 3.55 2006 Explorer FRONT $301.53
706930-8X RING & PINION KIT 3.55 RATIO-REVERSE, 26 SPLINE PINION REVERSE FRONT $242.60
707300-4X RING & PINION ASSEMBLY 3.55 RATIO, 27 SPLINE AXLES, CRUSH SLEEVE DESIGN D30 STYLE NON-TJ FRONT W/COLLAPSIBLE $241.11  
708132-2 RING & PINION KIT 3.55 2001 XJ $269.28
Your cost $48.98 +S&H

 

 
73368-5X RING & PINION KIT 3.55 RATIO-REVERSE, 26 SPLINE PINION $265.82
76385-5X RING & PINION W/SMALL PARTS 3:55 (39-11) $308.00
2005021-5 RING & PINION 3.73 2007 KA FRONT $239.70
706000-3X RING & PINION KIT 3.73   $263.47
706503-3X RING & PINION KIT 3.73 RATIO, 26 SPLINE PINION STRAIGHT CUT FRONT & REAR $249.71
706930-5X RING & PINION KIT 3.73 RATIO-REVERSE, 26 SPLINE PINIO REVERSE FRONT $235.93
707300-5X RING & PINION ASSEMBLY 3.73 RATIO, 26 SPLINE PINION, CRUSH SLEEVE DESIGN $234.94
707344-11X RING & PINION KIT 3.73 RATIO, 26 SPLINE PINION, SHORT PINION SHAFT TJ FRONT W/COLLAPSIBLE SPACER SHORT PINION $206.40
708132-4 RING & PINION KIT 3.73 RATIO, SHORT PINION DESIGN 2001-02 TJ $210.24  
708133-1 RING & PINION 3.73 2001 XJ $302.33
dana_differential_case_kit.jpg
 
707344-6X RING & PINION KIT 4.09 RATIO, 26 SPLINE PINION, SHORT PINION SHAFT TJ FRONT W/COLLAPSIBLE SPACER SHORT PINION $227.69
23721-5X RING & PINION W/ SMALL 4.10   $221.51
706000-4X RING & PINION KIT 4.10   $301.30
706503-4X RING & PINION KIT 4.10 RATIO STRAIGHT CUT FRONT & REAR $250.64
706930-4X RING & PINION KIT 4.10 RATIO-REVERSE, 26 SPLINE PINION REVERSE FRONT $264.16
708132-3 RING & PINION KIT 4.10 2001-02 TJ $245.65  
71864-5X RING & PINION 4.10 RING & PINION ONLY YJ REVERSE CUT $217.71  
706503-8X RING & PINION KIT 4.27 RATIO, 26 SPLINE PINION JEEP FRONT 1971 CJ-5, CJ-6, CJ-7 $259.99  
708098-5 RING & PINION 4.30 2001 Explorer FRONT $419.97  
706930-6X RING & PINION KIT 4.56 RATIO-REVERSE, 26 SPLINE PINION REVERSE FRONT $249.71  
708132-5 RING & PINION KIT 4.56 RATIO 2001-02 TJ $252.95  
70289-5X RING & PINION 5.38   $221.01  

Bearings Dana 30

      
DTSR30RMKT Bearing/Overhaul Kit Jeep    $107.87  
R30FRMK Bearing/Overhaul Kit Front    $111.66  
DTR30LRMK Bearing/Overhaul Kit JEEP Late    $114.64  
706016-X  Carrier Bearing    $26.29  
706030X Outer Pinion Bearings    $18.85  

  dana30front_th.jpg Click to see enlarged image of Dana 30 Front differential