We offer a complete line of rear-end parts for the Jeep JK & Rubicon differentials. 
You can purchase high quality ring and pinion sets in various ratios, high quality rear end bearing overhaul kits including pinion bearings, pinion seal, crush sleeve, pinion nut, shims, ring gear bolts, marking compound and gasket.
Along with our quality parts you have access to free applications information for available ring and pinion ratios, information to assist you in identification of the differential that you have. Free information on ring and pinion installation is provided. Plus carrier/case break innformation when you are considering gear ratio changes. You can review applications available to assist you with selection of the specific positraction unit that you may need to improve your performance, never get stuck again! Bearing Kits and Positraction Units are available.
We have a full service drivetrain shop specializing in Drivelines and Rear End repair and parts located in Reno Sparks NV. facility. Purchase the parts at drivetrain.com and receive free installation technical support by telephone! Yes real technicians with many years experience, not just a salesperson. Call toll free 1800-216-1632 if you have any questions or need technical support for your JK Rubicon
Dana 44Double click part number to see more information or to purchase on line.
Ring Gear & Pinion Jeep JK Rubicon Differential
Ring and Pinion Sets Jeep JK Front
|
Ratio |
Price |
Your gears run cooler and last longer!
Order above high performance synthetic oil and friction additive combo kit at time of order for ring and pinion or bearing overhaul kit and pay only $49.95 plus S&H, a $54.00 value.
|
|
| D30-456RJK | Dana 30 Front non-Rubicon JK |
4.56 |
$275.25 |
|
| D30-488RJK | Dana 30 Front non-Rubicon JK |
4.88 |
$275.25 |
|
| D30-513RJK | Dana 30 Front non-Rubicon JK |
5.13 |
$275.25 |
|
| D44-456RJK | Dana 44 Front Rubicon JK |
4.56 |
$275.25 |
|
| D44-488RJK | Dana 44 Front Rubicon JK |
4.88 |
$275.25 |
|
| D44-513RJK | Dana 44 Front Rubicon JK. |
5.13 |
$275.25 |
|
Ring & Pinions Jeep JK Rear
|
||||
| D44-456JK | Dana 44 Rear JK - All | 4.56 |
$275.25
|
Your cost $48.98 +S&H |
| D44-488JK | Dana 44 Rear JK - All | 4.88 |
$275.25
|
|
| D44-513JK | Dana 44 Rear JK - All | 5.13 |
$275.25
|
|
Ring & Pinions Jeep Rubicon Thick Gears to Fit 4.10 & Down Case |
||||
| D44-456GX | Dana 44 Front & Rear | 4.56 Thick |
$236.36
|
|
| D44-488GX | Dana 44 Front & Rear | 4.88 Thick |
$236.36
|
|
| D44-513GX | Dana 44 Front & Rear | 5.13 Thick |
$236.36
|
|
|
Description |
Part Number |
Price |
| Master Bearing Kits (Timken) | ||
| Dana 30 Front - non Rubicon JK | R30RJKMKT |
$202.23
|
| Dana 44 Front - Rubicon JK | RA28RJKFMKT |
$182.38
|
| Dana 44 Rear - all JK | RA28RJKMKT |
$245.35
|
| Master kits include pinion bearing, seal, crush sleeve, carrier bearings, shims, ring gear bolts, gasket and marking compound | ||
| Bearing Kits (Timken) same kit as above with no shims or bolts | ||
| Dana 30 Front - non Rubicon JK | R30RJKT |
$169.96
|
| Dana 44 Front - Rubicon JK | RA28RJFT |
$189.69.
|
| Dana 44 Rear - all JK | RA28RJKT |
$169.96.
|
| Installation Kits includes seal, nut and crush sleeve | ||
| Dana 30 Front - non Rubicon JK | D30JKIK |
$89.00
|
| Dana 44 Front - Rubicon JK | D44JKFIK |
$85.36
|
| Dana 44 Rear - all JK | D44KJIK |
$97.87
|
Description |
Part Number |
Price |
|
Dana 30 non Rubicon Front |
|
|
|
Dana 44 non Rubicon Rear TRAC-LOC |
DTS73613X |
$354.39 |
|
Dana 44 Rubicon Front Electric Locker Carrier Assembly |
LHM68017176AA |
$1900.00 |
|
Dana 44 Rubicon Rear Electric Locker Carrier Assembly |
LHM68036128AA |
$1990.00 |
|
|
|
|
|
|
Dana 44 Rubicon Rear Differential Complete Brake to Brake Front |
LHMP5153825 |
$1801.31 |
|
Dana 44 Rubicon Rear Differential Complete Brake to Brake Rear |
LHMP5153826 |
$2999.00 |
|