New Process model NP246 transfer case rebuild kits and parts

Are you having problems with your NP246 transfer case and need a rebuild kit or replacement parts?  We offer quality New Process model NP246 transfer case rebuild kits and parts.  These kits are designed colortransfer_large.jpgto be top of the line professional overhaul kits. A Transfer case illustration exploded view is provided to assist you in part identification and the assembly sequence. The NP246 transfer case is found in General Motors, Chevrolet, 1999 and later Chevrolet/GMC 4WD 1/2 Ton Pickup Silverado/Seirra, Suburban, Rebuilt NP246 Transfer Case and PartsTahoe & Yukon 4 wheel drive vehicles. 

The NP246 has a design problem where the pump can wear out the case causing premiture failure and leaking.   The problem with merely replacing the case is it won’t solve the problem.  Magnesium cases are soft; aluminum pumps are harder.  The problem leak will come back and ruin your day.  Maybe on someone else’s watch, but surely you pride yourself in fixing problems.  camra.jpgFix a factory defect, before problems arise we recommened our Transfer Case Saver part number MW52007.  You need to install this part before the oil pump causes your transfer case to fail. 

If you case has a hole in it and you want to repair it without replacing the case order our part number TRS482460.camra.jpg


A cross reference table is provided below to assist you in identification of your transfer case.   Check tag located on rear of unit for model number. An illustrated drawing is provide below to assist you in parts identification, ordering and assembly. Should you elect to replace you NP246 transfer case unit with our high quality rebuilt transfer cases that are remanufactured and factory tested.  For rebuilt transfer case see Chevrolet, these units are provided with a 12 month unlimited mileage warranty.   All rebuilt transfer case get new seals, bearings, chains, fork pad, encoder motors and viscous couplers.  All shafts, slider, hubs and planets are inspect to ensure proper factory tolerances are maintained. All units are tested at the factory prior to shipment.  Sometimes we can supply good used take out parts to save you money.  Don't see what you need just give us a call toll free at 800-216-1632.

 

Transfer Case NP246 Rebuild Kits, parts and drawing Products 

 

 
New Process Model 246
Part -Time Transfer Case Electric Shift  
1999-On GM 1/2 & 3/4 Ton Trucks, Suburban, Tahoe & Yukon Recommended fluid for NP246  part number 12378508 Autotrack lI 2 Quarts

PART NUMBER

DESCRIPTION

TYPE

YEARS

COST

DTS-BK351 Bearing Overhaul kit  

1999-On

$238.54

DTS-TSK-246 Gasket/Seal Kit      $44.95
DTS-MW52007 Transfer Case Saver prevent oil pump from damaging case use if case is not damaged      $104.25
TRS482460 Case Saver, NP 246  Washer type protect rear case half from pump damage     $54.44
DLG-NV20908 Rear Output Bearing      $48.74
TRS-331066 Bushing Tail Housing     $9.84
TRS-391670 Input, 32 spline, 4L80E     $164.75
TRS-352670B Input, 27 spline, 4L60  w/ .630" Wide Input Bearing     $164.96
TRS-HV-072 Chain GMT800 Chain, 1.25" Wide, 98 Pins, 3/8" Pitch, Rocker Pins full size SUV's

1999-On

$141.87

TRS-HV-063 Chain one blue link  1.25" wide 3/8 pitch, 98 Pitches, Rocker Durangeo, Dakoto, Jeep

1999-On

$141.96

TRS-371500 Pump Assembly      $96.19
TRS-351588A Planetary, 6 Pinion Call and see if we can provide a good take out unit and save money!   $453.91 
TRS-A411101 Friction Plate Kit includes 10 pieces  

1999-On

$90.18

ALT-4461047 Steel Plates Kit includes 9 pieces  

1999-On

$71.53

TRS-411849 Range Fork     $88.91
TRS-492645K Range Slider Hub  

1999-On

$91.68

ALT-12547605 Spring, clutch pack return  

1999-On

$19.16

TRS-411760A-1 Front Case Half C-3060 Call and see if we can provide a good take out unit and save money!    
TRS-411760A-2 Rear Case Half C-30605 Call and see if we can provide a good take out unit and save money!

 

 

 

Transfer Case Illustration click illustrationw to see enlarged view.

 NP246 transfer case parts    np246_clutch_th.jpg.jpg  np246_clutch_th.jpg

Transfer Case Saver a machined part not stamped metal. Your cost $98.00.

mw52007nvtransfcasesaverpump_p1_th.jpg

 

Transfer Case Repair Saver Your cost  $48.82.

Chevy Silverado/Tahoe  GMC Sierra/Yukon NP236 – NP246 – NP261 – NP263

Permanent pump wear protection

Good used case halves are a challenge to find.  New aftermarkets are available, for a price.

 The problem with merely replacing the case is it won’t solve the problem.  Magnesium cases are soft; aluminum pumps are harder.  The problem leak will come back.  Maybe on someone else’s watch, but surely you pride yourself in fixing problems.

 Save your money and fix their problem the first time with this simple drop-in:

 1) Clean case and repair damage with an   

   epoxy or you may choose to have welded

 2) Place BRNY protector in the pump pocket

 3) Continue the rebuild knowing it’s fixed

482460tcsaver.jpg

np246pumppockrepair.jpg

np246saverinplace.jpg

 

Parts for the NP246 are listed in the above table!